Low-energy X-ray Research Articles

Measurements regarding a combined therapy concept for ophthalmic tumors consisting of brachytherapy and x-rays.

Objective
We present a novel concept to treat ophthalmic tumors which combines brachytherapy and low-energy x-ray therapy. Brachytherapy with106Ru applicators applicators is inadequate for intraocular tumors with a height of 7 mm and more. This results from a steep dose gradient, and it is unfeasible to deliver the required dose at the tumor apex without exceeding the maximum tolerable sclera dose of usually 1000 to 1500 Gy. Other modalities, such as irradiation with charged particles, may be individually contraindicated. A dose boost at the apex provided by an x-ray therapy unit, performed simultaneously with the brachytherapy, results in a more homogeneous dose profile than brachytherapy alone. This avoids damage to organs at risk. The applicator may also serve as a beam stop for x-rays passing through the target volume, which reduces healthy tissue dosage. This study aims to investigate the suitability of the applicator to serve as a beam stop for the x-rays. 

Approach
A phantom with three detector types comprising a soft x-ray ionization chamber, radiochromic films, and a self-made scintillation detector was constructed to perform dosimetry. Measurements were performed using a conventional x-ray unit for superficial therapy to investigate the uncertainties of the phantom and the ability of the applicator to absorb x-rays. The manufacturer provided a dummy plaque to obtain x-ray dose profiles without noise from106Ru decays.

Results
The phantom is generally feasible to obtain dose profiles with three different detector types. The interaction of x-rays with the silver of the applicator leads to an increased dose rate in front of the applicator. The dose rate of the x-rays is reduced by up to 90 % behind a106Ru applicator. Therefore, a106Ru applicator can be used as a beam stop in combined x-ray and brachytherapy treatment.

[Clinical study of ear keloids with surgical excision and intraoperative low-energy X-ray irradiation therapy].

Objective:To explore the clinical efficacy of surgical excision combined with low-energy X-ray irradiation in the treatment of ear keloids. Methods:Clinical data of 32 cases of ear keloid lesions that received surgical treatment alone or surgery combined with radiotherapy from March 2019 to November 2022 in the Department of Otorhinolaryngology Head and Neck Surgery of the Tianjin First Central Hospital were retrospectively analyzed. Among them, 10 cases received radiotherapy and 22 cases did not receive radiotherapy. The radiotherapy group received irradiation with a large divided dose of 50 kV low-energy X-rays. The mode of fractionation radiotherapy was as follows: the first was 10 Gy of intraoperative radiation therapy and the second was 8 Gy on the 3rd postoperative day for a total of 18 Gy. The local efficacy and skin radiation reaction were observed at a follow-up of 8-52 months. Results:The median follow-up was 26 months, and as of the date of the last follow-up, 9 cases were cured and 1 case was ineffective in the radiotherapy group, with an effective rate of 90.0%, while 9 cases were cured and 13 cases were ineffective in the no-radiotherapy group, with an effective rate of 40.9%. The recurrence of ear keloids was not related to the side, site, or etiology of the patient's onset（P>0.05）. Recurrence was related to whether or not the patients received radiotherapy（χ²=4.885, P<0.05）, and the recurrence rate in the radiotherapy group（10.0%） was significantly lower than that in the non-radiotherapy group（59.1%）. Conclusion:Surgical excision combined with low-energy X-ray irradiation therapy is an effective method of treating keloids in the ear, especially with intraoperative radiation therapy can achieve more satisfactory results.

Investigation on radiation attenuation properties of natural stone samples traded in Turkey

Although radioprotection is globally regulated for high radiation exposure, formal guidelines concerning natural radiation exposure that causes stochastic radiation effects have not been established. The commonly used absorbers lead, tungsten and bismuth are not appropriate for the radioprotection of the public. The primary barrier against natural radiation is the structural components of buildings, where humans spend approximately 80 % of their lifetime. Natural stones are secondary materials, which are applied to walls and floors as coating. This study focuses on the radiation shielding properties of natural stones. Herein, the samples of marble, granite and sedimentary rock traded in Turkey were examined to determine whether they can serve as passive or alternative radioprotection materials. Notable gamma absorption rates were obtained when an intense gamma source with an energy of 662 keV was used. The calculated mass attenuation coefficients were comparable with those of copper and aluminium. The mean mass attenuation coefficient was 0.082 cm2/g for marbles and granites and 0.080 cm2/g for sedimentary rocks. Considering the stochastic effects, the use of the natural stones as construction materials is anticipated to significantly reduce the natural radiation level in inhabitable regions. Furthermore, natural stones can be used in clinics as secondary radiation shields against low-energy gamma and x-rays.

Nanocomposite-Supported Polymeric Composites Prepared with Different Deposition Bases: Characterization and Application in X-ray Shielding

This study deals with the preparation of magnetite nanoparticles (NPs) via a coprecipitation method using several precipitation bases: binary precipitator (NH4OH), mono precipitator (NaOH), and weak precipitator (Ca(OH)2). The prepared magnetite NPs were identified using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, surface area analysis, magnetic properties, Fourier-transformed infrared spectra (FT-IR), and ultra-violet UV–visible spectra. As a result, the phases of the produced magnetite NPs were unaffected by the use of various bases, but their crystallite sizes were affected. It was found that the binary base provided the smallest crystallite size, the mono base provided an average size, and the weak base provided the largest crystallite size. The UV–visible absorption spectroscopy investigation revealed that the absorption and the energy gap rose with a reduction in nanoparticle size. The prepared magnetite NPs were used to manufacture polymeric-based nanocomposites employed as protective shields from low-energy X-rays that are light in weight. These samples were identified using XRD, atomic force microscopy (AFM), and FT-IR spectroscopy. The crystallite size was slightly larger than it was in the case of magnetite NPs. This is consistent with the results of AFM. The interference between the two phases was observed in the results of the FT-IR spectra. The effects of the size of the magnetite NPs on the attenuation tests, linear attenuation coefficient, mass attenuation coefficient, half-value layer, and mean free path were investigated. The results showed that the efficiency of using manufactured shields increases with the decrease in the NPs size of the magnetite used as a reinforcement phase for a range of low operating voltages.

Development of lead-free metal carbides and ceramic decorated HDPE composites for low energy X-ray shielding applications

Materials with high atomic numbers are effective for shielding ionizing radiation. However, some, such as lead, are toxic, and their disposal causes environmental damage. Polymer composites are a good choice for radiation shielding because they are environmentally friendly, lightweight and non-toxic. This study investigated the possibility of using high-density polyethylenhe (HDPE) composites doped with three different materials comprising the carbide (such as tungsten carbide, and molybdenum carbide) and ceramic (silicon carbide) as a kilo-voltage radiation shield. The linear attenuation coefficients of the composites ranged from 0.21 to 2.82cm−1. The measured results are in good agreement with XCOM with an average error of 13.82%. Through meticulous empirical analysis, including the assessment of linear and mass attenuation coefficients, half-value layer (HVL), and mean free path (MFP), our findings suggest that HDPE composites doped with 15% MoC present the most promising configuration for low-energy X-ray shielding (30–50 keV). This work concludes that HDPE composites decorated with MoC and W could be used as an alternative and environment-friendly material for shielding of kilo-voltage X-rays in medical diagnostics and research environments.

Structural, chemical, and magnetic investigation of a graphene/cobalt/platinum multilayer system on silicon carbide

We investigate the magnetic interlayer coupling and domain structure of ultra-thin ferromagnetic (FM) cobalt (Co) layers embedded between a graphene (G) layer and a platinum (Pt) layer on a silicon carbide (SiC) substrate (G/Co/Pt on SiC). Experimentally, a combination of x-ray photoemission electron microscopy with x-ray magnetic circular dichroism has been carried out at the Co L-edge. Furthermore, structural and chemical properties of the system have been investigated using low energy electron diffraction (LEED) and x-ray photoelectron spectroscopy (XPS). In situ LEED patterns revealed the crystalline structure of each layer within the system. Moreover, XPS confirmed the presence of quasi-freestanding graphene, the absence of cobalt silicide, and the appearance of two silicon carbide surface components due to Pt intercalation. Thus, the Pt-layer effectively functions as a diffusion barrier. The magnetic structure of the system was unaffected by the substrate’s step structure. Furthermore, numerous vortices and anti-vortices were found in all samples, distributed all over the surfaces, indicating Dzyaloshinskii–Moriya interaction. Only regions with a locally increased Co-layer thickness showed no vortices. Moreover, unlike in similar systems, the magnetization was predominantly in-plane, so no perpendicular magnetic anisotropy was found.

Modification of BCLX pre-mRNA splicing has antitumor efficacy alone or in combination with radiotherapy in human glioblastoma cells

Dysregulation of anti-apoptotic and pro-apoptotic protein isoforms arising from aberrant splicing is a crucial hallmark of cancers and may contribute to therapeutic resistance. Thus, targeting RNA splicing to redirect isoform expression of apoptosis-related genes could lead to promising anti-cancer phenotypes. Glioblastoma (GBM) is the most common type of malignant brain tumor in adults. In this study, through RT-PCR and Western Blot analysis, we found that BCLX pre-mRNA is aberrantly spliced in GBM cells with a favored splicing of anti-apoptotic Bcl-xL. Modulation of BCLX pre-mRNA splicing using splice-switching oligonucleotides (SSOs) efficiently elevated the pro-apoptotic isoform Bcl-xS at the expense of the anti-apoptotic Bcl-xL. Induction of Bcl-xS by SSOs activated apoptosis and autophagy in GBM cells. In addition, we found that ionizing radiation could also modulate the alternative splicing of BCLX. In contrast to heavy (carbon) ion irradiation, low energy X-ray radiation-induced an increased ratio of Bcl-xL/Bcl-xS. Inhibiting Bcl-xL through splicing regulation can significantly enhance the radiation sensitivity of 2D and 3D GBM cells. These results suggested that manipulation of BCLX pre-mRNA alternative splicing by splice-switching oligonucleotides is a novel approach to inhibit glioblastoma tumorigenesis alone or in combination with radiotherapy.

Towards Precision Muonic X-ray Measurements of Charge Radii of Light Nuclei

We, the QUARTET Collaboration, propose an experiment to measure the nuclear charge radii of light elements with up to 20 times higher accuracy. These are essential both for understanding nuclear physics at low energies, and for experimental and theoretical applications in simple atomic systems. Such comparisons advance the understanding of bound-state quantum electrodynamics and are useful for searching for new physics beyond the Standard Model. The energy levels of muonic atoms are highly susceptible to nuclear structure, especially to the mean square charge radius. The radii of the lightest nuclei (with the atomic number, Z=1,2) have been determined with high accuracy using laser spectroscopy in muonic atoms, while those of medium mass and above were determined using X-ray spectroscopy with semiconductor detectors. In this communication, we present a new experiment, aiming to obtain precision measurements of the radii of light nuclei 3≤Z≤10 using single-photon energy measurements with cryogenic microcalorimeters; a quantum-sensing technology capable of high efficiency with outstanding resolution for low-energy X-rays.

Radiological injuries under low energy x-rays in mice depending on dose and protocol: comparative characterization of lesion severity and impact of the in vivo bone response on retrospective dose estimations

Objective. To improve our knowledge about the biological effects of over exposures involving low-energy x-rays, we developed and characterized a preclinical mouse model allowing to mimic different lesion severity degrees induced by 80 kV x-ray depending on the dose and protocol (single or repeated exposure). Approach. Mice were locally exposed (paw) to 80 kV x-rays in a single (15, 30 or 45 Gy in K air) or repeated exposition (2 × 15 or 3 × 15 Gy in K air) to assess different degrees of lesion severity. Six post-irradiation euthanasia time points (0, 7, 14, 21, 42, and 84 days) were determined to follow up the evolution of lesions based on the lesion score, weighing and cutaneous blood perfusion. The bone dose was estimated at the different time points by electron paramagnetic resonance (EPR) spectroscopy. Main results. The monitoring of the lesion severity allows to classify the exposure protocols according to their severity. EPR spectroscopy measurements allow to determine the bone dose on the day of irradiation which is 7 times higher than the initial dose for single protocols. However, the initial signal measured at the end of the repeated exposure was 27% lower than the signal measured for a single dose. The study of the kinetics of EPR signal showed a decrease of the EPR signal which is dependent on the exposure protocol but not on dose highlighting the impact of bone physiology on the bone dose estimation. Significance: the preclinical model developed allows to assess the impact of the dose and protocol on the lesion severity induced by low-energy x-ray. For the first time, the dynamics of free radicals have been quantified in an in vivo model, highlighting that the doses actually administered can be underestimated if samples are taken weeks or even months after exposure.

Radiation shielding assessment for interventional radiology personnel: Geant4 dosimetry of lead-free compositions

The inherent biological hazards associated with ionizing radiation necessitate the implementation of effective shielding measures, particularly in medical applications. Interventional radiology, in particular, poses a unique challenge as it often exposes medical personnel to prolonged periods of high x-ray doses. Historically, lead and lead-based compounds have been the primary materials employed for shielding against photons. However, the drawbacks of lead, including its substantial weight causing personnel’s inflexibility and its toxicity, have raised concerns regarding its long-term impact on both human health and the environment. Barium tantalate has emerged as a promising alternative, due to its unique attenuation properties against low-energy x-rays, specifically targeting the weak absorption area of lead. In the present study, we employ the Geant4 Monte Carlo simulation tool to investigate various formulations of barium tantalate doped with rare earth elements. The aim is to identify the optimal composition for shielding x-rays in the context of interventional radiology. To achieve this, we employ a reference x-ray spectrum typical of interventional radiology procedures, with energies extending up to 90 keV, within a carefully designed simulation setup. Our primary performance indicator is the reduction in air kerma transmission. Furthermore, we assess the absorbed doses to critical organs at risk within a standard human body phantom protected by the shield. Our results demonstrate that specific concentrations of the examined rare earth impurities can enhance the shielding performance of barium tantalate. To mitigate x-ray exposure in interventional radiology, our analysis reveals that the most effective shielding performance is achieved when using barium tantalate compositions containing 15% Erbium or 10% Samarium by weight. These findings suggest the possibility of developing lead-free shielding solutions or apron for interventional radiology personnel, offering a remarkable reduction in weight (exceeding 30%) while maintaining shielding performance at levels comparable to traditional lead-based materials.

Radiation sensitivity of Aspergillus niger of low-energy X-rays and Caesium-137 gamma rays

The radiation sensitivities of Aspergillus niger in several energy X-rays and gamma rays were investigated. Experiment and simulation were conducted to evaluate the X-ray energy spectra and depth dose distributions. The result showed that the microbicidal effectiveness of Aspergillus niger could depend only on the dose regardless of photon energy. It should be noted that the depth dose of low-energy X-rays, including characteristic X-rays of tungsten (LⅢab-ray and Lα-ray of 8.4 keV and 10.2 keV, respectively) is variable even at 1 mm.

FLASH Radiation Therapy — Key physical irradiation parameters and beam characteristics

FLASH-RT represents a novel therapeutic radiation modality that holds remarkable potential for mitigating radiation therapy's adverse side effects. This cutting-edge technology allows for sparing healthy tissue while precisely targeting cancerous cells. This is possible by administering an ultra-high-dose-rate in less than a few hundred milliseconds. FLASH-RT has demonstrated impressive results in small-animal models, prompting scientists to adapt and advance existing technologies to make it a viable treatment option for humans. However, producing the ultra-high-dose-rate radiation required for the therapy remains a significant challenge. Several radiation sources, such as very high energy electrons (VHEEs), low energy electrons, x-rays, and protons, have been studied for their ability to deliver the necessary dose. Among them, FLASH-x-ray has gained the most attention owing to its capacity to penetrate deep-seated tumors. Despite the complexity of the process, the potential advantages of FLASH-RT made it an exciting area of research. To achieve the FLASH effect, high-frequency, pulsed irradiated accelerator technology can be employed. Sparing healthy tissue may allow for more aggressive and effective cancer treatments, leading to a better quality of life for patients. Ongoing research and development will be necessary to refine and optimize this approach to radiation therapy.

Background experiment of the low energy x-ray telescope detectors on insight-HXMT

The low energy x-ray telescope (LE) is one of the main instruments of the insight-hard x-ray modulation telescope, the first x-ray astronomical satellite of China. The scientific objectives of the LE focus on the scanning and pointed observations of the x-ray sources in the soft x-ray band (1–13 keV). In order to complete the observation tasks and accurately analyze the background information of the LE, it is essential to obtain the background data of the detectors. Therefore, we designed an LE background experiment. The experiment began with an underground background experiment in the China Jinping Underground Laboratory with a rock of a thickness of 2400 m, followed by a ground background experiment. These two experiments lasted for a long time, and through comparison and analysis of the background data, it was found that underground laboratories significantly shielded cosmic rays. In addition, the background of detectors in the underground experiment was more than one order of magnitude lower than that in the ground experiment. The experiments also revealed multiple x-ray fluorescence peaks of various elements in the background, including silicon from the detector itself, erbium in the ceramic substrate, and copper in the mounting plate. The anti-coincidence design of detectors was observed to reduce the x-ray fluorescence peaks of silicon. By comparing the background flux obtained with the background flux in the orbit, it was found that the background generated by radioactive substances inside the LE detector is very low. Within the energy range of less than 7.5 keV, the flux in the orbit is about 0.012 counts/s/keV, the ground flux is ∼3 × 10−3 counts/s/keV, and the underground flux is about 1.5 × 10−4 counts/s/keV. However, the flux in the orbit significantly increases above 7.5 keV, which does not occur in both the ground and underground background experiments. These results provide reference and guidance for scientific teams and instrument teams to analyze the data of the low energy x-ray telescope.

Design and verification of the electric control box of the low energy x-ray telescope onboard the Insight-HXMT

Design and verification of the electric control box of the low energy x-ray telescope onboard the Insight-HXMT

Novel sensor developments for photon science at the MPG semiconductor laboratory

The world of photon science experiences significant advancements since the advent of synchrotron light sources with unprecedented brilliance, intensity and pulse repetition rates, with large implications on the detectors used for instrumentation. Here, an overview about the work on this field carried out at the semiconductor laboratory of the Max-Planck-Society (MPG HLL) is given. Main challenges are high dynamic range to resolve faint features at the fringes of scatter images as well as structures in bright peaks, and high bandwidth to fully exploit the fast timing capability of the source. A newly developed device to improve the signal-to-noise-ratio (SNR) at high bandwidths is the so-called MARTHA (Monolithic Array of Reach-Through Avalanche Photodiodes) structure, which integrates an array of APDs on a monolithic substrate. The reach-through architecture assures near 100% fill factor and allows implementing a thin entrance window with optimized quantum efficiency for low energy X-rays. The structures operate in proportional mode with adjustable gain, and can serve as a drop-in replacement for PAD detectors in hybrid pixel systems. A more sophisticated solution for low to medium frame rate applications with high contrast requirement are pnCCDs with high dynamic range in the pixel area featuring DEPFET based readout nodes with non-linear amplification (NLA). The high dynamic range mode has been demonstrated for pnCCD devices with a pixel size down to 75 μm2. Framerates of up to 1 kHz are possible for a 1 Megapixel detector. Small size prototypes of these structures have recently been manufactured. Modified DEPFET structures with build-in non-linear amplification are also used to implement active pixel detectors optimized for high dynamic range. Successfully prototyped for the DSSC sensors (DEPFET Sensor with Signal Compression) at the XFEL, these structures are increasingly being used in applications requiring high contrast and intensity, e.g., TEM imaging. Charge handling capability and output characteristics can be tailored to the requirements, as well as pixel geometry and size. The large intrinsic gain of the DEPFET provides excellent SNR even at fast timing. Pixels can be read with a speed of 100 ns, the resulting frame rate depends on the degree of readout parallelization.

GaN-Based Low-Energy X-Ray Single Photon Detector With Photon Energy Resolution and Fast Response

GaN-Based Low-Energy X-Ray Single Photon Detector With Photon Energy Resolution and Fast Response

Clonogenic assay and computational modeling using real cell images to study physical enhancement and cellular sensitization induced by metal nanoparticles under MV and kV X-ray irradiation.

This study was initiated due to the physically unexplainable tumor controls resulting from metal nanoparticle (MNP) experiments even under MV X-ray irradiation. A more accurate explanation of the mechanism of radiosensitization induced by MNP is warranted, considering both its physical dose enhancement and biological sensitization, as related research is lacking. Thus, we aimed to examine the intricate dynamics involved in MNP-induced radiosensitization. We conducted specifically designed clonogenic assays for the A549 lung cancer cell line with MNP irradiated by 6 MV and 300 kVp X-rays. Two types of MNP were employed: one based on iron oxide, promoting ferroptosis, and the other on gold nanoparticles known for inducing a significant dose enhancement, particularly at low-energy X-rays. We introduced the lethality enhancement factor (LEF) as the fraction in the cell killing attributed to biological sensitization. Subsequently, Monte Carlo simulations were conducted to evaluate the radial dose profiles for each MNP, corresponding to the physical enhancement. Finally, the local effect model was applied to the clonogenic assay results on real cell images. The LEF and the dose enhancement in the cytoplasm were incorporated to increase the accuracy in the average lethal events and, consequently, in the survival fraction. The results reveal an increased cell killing for both of the MNP under MV and kV X-ray irradiation. In both types of MNP, the LEF reveals a biological sensitization evident. The sensitizer enhancement ratio, derived from the calculations, exhibited only 3% and 1% relative differences compared to the conventional linear-quadratic model for gold and ferroptosis inducer nanoparticles, respectively. These findings indicate that MNPs sensitize cells via radiation through mechanisms akin to ferroptosis inducers, not exclusively relying on a physical dose enhancement. Their own contributions to survival fractions were successfully integrated into computational modeling.

Structural and electronic properties of MoS2 and MoSe2 monolayers grown by chemical vapor deposition on Au(111).

The exceptional electronic and photonic properties of the monolayers of transition metal dichalcogenides including the spin-orbit splitting of the valence and conduction bands at the K points of the Brillouin zone make them promising for novel applications in electronics, photonics and optoelectronics. Scalable growth of these materials and understanding of their interaction with the substrate is crucial for these applications. Here we report the growth of MoS2 and MoSe2 monolayers on Au(111) by chemical vapor deposition at ambient pressure as well as the analysis of their structural and electronic properties down to the atomic scale. To this aim, we apply ultrahigh vacuum surface sensitive techniques including scanning tunneling microscopy and spectroscopy, low-energy electron diffraction, X-ray and angle-resolved ultraviolet photoelectron spectroscopy in combination with Raman spectroscopy at ambient conditions. We demonstrate the growth of high-quality epitaxial single crystalline MoS2 and MoSe2 monolayers on Au(111) and show the impact of annealing on the monolayer/substrate interaction. Thus, as-grown and moderately annealed (<100 °C) MoSe2 monolayers are decoupled from the substrate by excess Se atoms, whereas annealing at higher temperatures (>250 °C) results in their strong coupling with the substrate caused by desorption of the excess Se. The MoS2 monolayers are strongly coupled to the substrate and the interaction remains almost unchanged even after annealing up to 450 °C.

High-speed readout system of X-ray CMOS image sensor for time domain astronomy

We developed an FPGA-based high-speed readout system for a complementary metal-oxide-semiconductor (CMOS) image sensor to observe soft X-ray transients in future satellite missions, such as HiZ-GUNDAM. Our previous research revealed that the CMOS image sensor has low-energy X-ray detection capability (0.4–4 keV) and strong radiation tolerance, which satisfies the requirements of the HiZ-GUNDAM mission. However, CMOS sensors typically have small pixel sizes (e.g., ∼10 µm), resulting in large volumes of image data. GSENSE400BSI has 2048×2048 pixels, producing 6 Mbyte per frame. These large volumes of observed raw image data cannot be stored in a satellite bus system with a limited storage size. Therefore, only X-ray photon events must be extracted from the raw image data. Furthermore, the readout time of CMOS image sensors is approximately ten times faster than that of typical X-ray CCDs, requiring faster event extraction on a timescale of ∼0.1 s. To address these issues, we have developed an FPGA-based image signal processing system capable of high-speed X-ray event extraction onboard without storing raw image data. The developed compact system enabled mounting on a CubeSat mission, facilitating early in-orbit operation demonstration. Here, we present the design and results of the performance evaluation tests of the proposed FPGA-based readout system. Utilizing X-ray irradiation experiments, the results of the X-ray event extraction with the onboard and offline processing methods were consistent, validating the functionality of the proposed system.

In-orbit Background and Sky Survey Simulation Study of POLAR-2/LPD

The Low-Energy X-ray Polarization Detector (LPD) is one of the payloads in the POLAR-2 experiment, designed as an external payload for the China Space Station deployment in early 2026. LPD is specifically designed to observe the polarization of gamma-ray burst (GRB) prompt emission in the energy range of 2–10 keV, with a wide field of view (FoV) of 90° in preliminary design. This observation is achieved using an array of X-ray photoelectric polarimeters based on gas pixel detectors. Due to the wide FoV configuration, the in-orbit background count rate in the soft X-ray range is high, while GRBs themselves also exhibit high flux in this energy band. In order to assess the contribution of various background components to the total count rate, we conducted detailed simulations using the GEANT4 C++ package. Our simulations encompassed the main interactions within the instrument materials and provided insights into various background components within the wide-FoV scheme. The simulation results reveal that among the background components, the primary contributors are the cosmic X-ray background (CXB) and bright X-ray sources. The total background count rate of LPD, after applying the charged particle background rejection algorithm, is approximately 0.55 counts cm–2 s–1 on average, and it varies with the detector’s orbit and pointing direction. Furthermore, we performed comprehensive simulations and comparative analyses of the CXB and X-ray bright sources under different FoVs and detector pointings. These analyses provide valuable insights into the background characteristics for soft X-ray polarimeter with wide FoV.